描述
The TPS6040x is a family of devices that generate an unregulated negative output voltage from an input voltage ranging from 1.6 V to 5.5 V. The devices are typically supplied by a preregulated supply rail of 5 V or 3.3 V. Due to its wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell can also power them.
Only three external 1-µF capacitors are required to build a complete dc/dc charge pump inverter. Assembled in a 5-pin SOT23 package, the complete converter can be built on a 50-mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry.
The TPS6040x can deliver a maximum output current of 60 mA with a typical conversion efficiency of greater than 90% over a wide output current range. Three device options with 20-kHz, 50-kHz, and 250-kHz fixed frequency operation are available. One device comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.
特性
-
Qualified for Automotive Applications
-
Inverts Input Supply Voltage
-
Up to 60-mA Output Current
-
Only Three Small 1-µF Ceramic Capacitors Needed
-
Input Voltage Range From 1.6 V to 5.5 V
-
PowerSave-Mode for Improved Efficiency at Low Output Currents (TPS60400)
-
Device Quiescent Current Typical 100 µA
-
Integrated Active Schottky-Diode for Start-Up Into Load
-
Small 5-Pin SOT23 Package
-
Evaluation Module Available TPS60400EVM-178
-
applications
-
LCD Bias
-
GaAs Bias for RF Power Amps
-
Sensor Supply in Portable Instruments
-
Bipolar Amplifier Supply