LTC1049
低功耗的零漂移运算放大器与内部电容
特点
描述
The LTC1049 is a high performance, low power zero-drift operational amplifier. LTC1049是一种高性能，低功耗，零漂移运算放大器。 The two sample-and-hold capacitors usually required externally by other chopper stabilized amplifiers are integrated on the chip.在芯片上集成两个采样和保持，通常需要由其他斩波稳定放大器外部电容器。 Further, the LTC1049 offers superior DC and AC performance with a nominal supply current of only 200µA.此外，LTC1049提供了优越的直流和交流性能与标称电源电流仅为200μA。
The LTC1049 has a typical offset voltage of 2µV, drift of 0.02µV/°C, 0.1Hz to 10Hz input noise voltage of 3µV PP and typical voltage gain of 160dB. LTC1049具有0.02μV/°C间2μV，漂移，为0.1Hz的典型失调电压至10Hz的输入噪声电压3μVPP和160分贝典型的电压增益。 The slew rate is 0.8V/µs with a gain bandwidth product of 0.8MHz.摆率与0.8MHz的增益带宽积0.8V/μs。
Overload recovery time from a saturation condition is 6ms, a significant improvement over chopper amplifiers using external capacitors.从饱和条件下的过载恢复时间为6ms，斩波放大器使用外部电容，显着改善。
The LTC1049 is available in a standard 8-pin plastic dual in line, as well as an 8-pin SO package. LTC1049是符合标准的8引脚塑料双，以及8引脚SO封装。 The LTC1049 can be a plug-in replacement for most standard op amps with improved DC performance and substantial power savings. LTC1049可以是一个插件更换改进的DC性能和可观的积蓄力量最标准的运算放大器。
- Low Supply Current: 200µA低电源电流：200μA
- No External Components Required无需外部元件
- Maximum Offset Voltage: 10µV最大失调电压：10μV
- Maximum Offset Voltage Drift: 0.1µV/°C最大失调电压漂移：0.1μV/°C间
- Single Supply Operation: 4.75V to 16V单电源供电：4.75V至16V
- Input Common Mode Range Includes Ground输入共模范围包括地
- Output Swings to Ground接地的输出摆幅
- Typical Overload Recovery Time: 6ms典型的过载恢复时间：6ms
- Available in 8-Pin SO and PDIP Packages提供8引脚SO和PDIP封装
-