LT1932恒流ThinSOT封装的DC / DC LED驱动器
特点
With an input voltage range of 1V to 10V, the device works from a variety of input sources. 1V至10V输入电压范围,设备可以从各种输入源。 The LT1932 accurately regulates LED current even when the input voltage is higher than the LED voltage, greatly simplifying battery-powered designs. LT1932准确地调节LED电流,即使在输入电压高于LED的电压,大大简化了电池供电的设计。 A single external resistor sets LED current between 5mA and 40mA, which can then be easily adjusted using either a DC voltage or a pulse width modulated (PWM) signal.单个外部电阻设定LED的电流5mA电流40毫安的,然后可以很容易地使用一个直流电压或脉冲宽度调制(PWM)信号调整。 When the LT1932 is placed in shutdown, the LEDs are disconnected from the output, ensuring a quiescent current of under 1µA for the entire circuit. LT1932被放置在关机时,LED的输出断开,以确保整个电路下1μA静态电流。 The device's 1.2MHz switching frequency permits the use of tiny, low profile chip inductors and capacitors to minimize footprint and cost in space-conscious portable applications.设备的1.2MHz的开关频率允许使用纤巧,低调的片式电感器和电容器,以尽量减少占用空间敏感的便携式应用和成本。
应用