主页 > 产品中心 > 传感器-敏感元器件
744252510
产品图片仅供参考
欢迎索取产品详细资料

744252510

  • 所属类别:传感器-敏感元器件
  • 产品名称:Common Mode Chokes / Filters WE-SL3 SMD Filter 51 uH 500mA .25Ohm
  • 厂商:Wurth Elektronik
  • 生产批号:24+
  • 封装:SMD
  • 库存状态:有库存
  • 库存量:32220
  • 最低订购量:1
  • 详细资料:点击查找744252510的pdf资料
  • 点击询价
联系我们 在线客服1 在线客服2 点击发送邮件
  • 产品介绍
Cautions and Warnings:
The following conditions apply to all goods within the product series of WE-SL3 ofWürth
Elektronik eiSos GmbH & Co. KG:
General:
• This electronic component is designed and manufactured for use in general electronic equipment.
• Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any
equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,
ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are
especially required and/or if there is the possibility of direct damage or human injury.
• Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.
• The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions
specified in the datasheet are not met, the wire insulation may be damaged or dissolved.
• Do not drop or impact the components, the component may be damaged.
• Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth
Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and
sustainability over time.
• The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the
authority of the customer. All technical specifications for standard products also apply to customer specific products.
Product specific:
Soldering:
• The solder profile must comply with the technical product specifications. All other profiles will void the warranty.
• All other soldering methods are at the customers’ own risk.
• Strong forces which may affect the coplanarity of the components’ electrical connection with the PCB (i.e. pins), can damage the part,
resulting in avoid of the warranty.
Cleaning and Washing:
• Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire
insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product.
• Using a brush during the cleaning process may break the wire due to its small diameter. Therefore, we do not recommend using a brush
during the PCB cleaning process.
Potting:
• If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking
could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a
manual inspection after potting to avoid these effects.
Storage Conditions:
• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer
degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of
shipment.
• Do not expose the components to direct sunlight.
• The storage conditions in the original packaging are defined according to DIN EN 61760-2.
• The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components.
Packaging:
• The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is
lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured.
Handling:
• Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.
• Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.
• The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient
temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum
temperature specified.
These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.
However, no responsibility is assumed for inaccuracies or incompleteness.

744252510相关的IC还有:


型号厂商批号封装说明
744252510 Wurth Elektronik24+SMDCommon Mode Chokes / Filters WE-SL3 SMD Filter 51 uH 500mA .25Ohm

热门搜索


型号厂商批号封装说明
KEYSTONE26 Keystone Electronics24+连接器EYELET 0.187" BRASS TIN PLATED
KPSE06E14-19SA206 ITT24+连接器Conn Circular SKT 19 POS Crimp ST Cable Mount 19 Terminal 1 Port
KPSE06J14-19P ITT24+连接器Circular MIL Spec Connector KPSE 19C 19#20 PIN PLUG
W-1-005-4STUD T&M24+DIPSERIES W - Stud Input - 4 Stud Type
ABBH2214SDAM AB Connectors2024+连接器连接器尾管
C193A/24EV-U1 沙尔特宝25+DIPVoltage 1100v electric current 50A接触器/优势渠道快捷交付
C195A/24EC-U2 沙尔特宝25+DIP接触器/优势渠道快捷交付
D-U204-E Mors Smitt24+DIP瞬时继电器
PW620-18d/2S/R/KS135 FSG24+DIPStellungsferngeber位置传感器电位器
ST1-DC12V-F Panasonic Electronic Components24+DIPPower Relay 12VDC 5DC/8AAC SPST-NO/SPST-NC(31mm 14mm 11.3mm) THT
MER1S1505SC Murata Power Solutions24+DIPDC DC CONVERTER 5V 1W
P783-Q24-S5-S CUI Inc24+DIPDC DC CONVERTER 5V 15W
9001-18321C00A Oupiin24+连接器DIN41612 Half R Female 48 Pin
9001-18481C00A Oupiin24+连接器DIN41612 Half R Female 48 Pin
CIR013106T01031819SCNP0406 ITT Interconnect Solutions2023+连接器Standard Circular Connector
CIR013106T01031819SCYP0406 ITT Interconnect Solutions24+连接器Standard Circular Connector
110IMX35D12D12-8G Bel Power Solutions24+继电器DC DC CONVERTER 12V 12V 12V 35W
SF400-1F 法国利奇24+继电器RAILWAY SOCKET BASE - H MOUNTING STYLE
UTS6JC10E6S SOURIAU-SUNBANK23+连接器CONN PLUG FMALE 6P GOLD SLDR CUP
DPX2ME-A106SA106S-34B-0001 ITT22+连接器Circular MIL Spec Connector

Wurth Elektronik品牌产品推荐


型号厂商批号封装说明
744272221 Wurth Elektronik16+SMDCMC 220UH 2.2A 2LN 780 OHM SMD
744774027 Wurth Elektronik15+SMDFIXED IND 2.7UH 4A 45 MOHM SMD
7447715001 Wurth Elektronik15+SMDFIXED IND 1.8UH 7.6A 9.5 MOHM
744771147 Wurth Elektronik15+SMDFIXED IND 47UH 2.21A 75 MOHM SMD
744770256 Wurth Elektronik15+SMDFIXED IND 560UH 800MA 1.07 OHM
744777004 Wurth Elektronik15+SMDFIXED IND 4.7UH 4A 40 MOHM SMD
744775222 Wurth Elektronik15+SMD744775222 FIXED IND 220UH 510MA 960 MOHM
744777239 Wurth Elektronik15+SMDFIXED IND 390UH 380MA 2.85 OHM

分类检索