LTC1053
LTC1053 由 LT 生产,采用 DIP-14,SOW-18 封装,批号 11+,芯微百年深圳仓库现货 30,000 个。
- 库存量
- 30,000个
- 交期
- 待确认
- 最低订购量
- 1 个
该型号暂未公开报价,请索取报价。
完整规格
| 参数 | 值 |
|---|---|
| 型号 | LTC1053 |
| 厂商 | LT |
| 所属类别 | 运算放大器 |
| 库存状态 | 现货 |
| 封装 | DIP-14,SOW-18 |
| 生产批号 | 11+ |
| 库存量 | 30,000个 |
| 最低订购量 | 1 个 |
| 交期 | 待确认 |
产品详情
LTC1053双/四路内部电容器的精密零漂移运算放大器
特点
- Dual/Quad Low Cost Precision Op Amp双/四路,低成本的精密运算放大器
- No External Components Required无需外部元件
- Maximum offset Voltage 5µV最大偏移电压5μV
- Maximum Offset Voltage Drift 0.05µV/°C最大失调电压漂移0.05μV/℃
- Low Noise 1.5µVp-p (0.1Hz to 10Hz)低噪声,1.5μVp-P(0.1Hz至10Hz)
- Minimum Voltage Gain, 120dB最小电压增益,120分贝
- Minimum PSRR, 120dB最低的PSRR,120分贝
- Minimum CMRR, 114dB最小共模抑制比(CMRR),114分贝
- Low Supply Current 1mA/Op Amp低电源电流1mA/Op放大器
- Single Supply Operation 4.75V to 16V单电源供电4.75V至16V
- Input Common Mode Range Includes Ground输入共模范围包括地
- Output Swings to Ground接地的输出摆幅
- Typical Overload Recovery Time 3ms典型的过载恢复时间为3ms
- Pin Compatible with Industry Standard Dual and Quad Op Amps行业标准的双路和四路运算放大器引脚兼容
- 描述
The LTC™1051/LTC1053 are high performance, low cost dual/quad zero-drift operational amplifiers.此外,LTC™1051/LTC1053是高性能,低成本,双通道/四零漂移运算放大器。 The unique achievement of the LTC1051/LTC1053 is that they integrate on chip the sample-and-hold capacitors usually required externally by other chopper amplifiers. LTC1051/LTC1053的独特成就是,他们在芯片上集成的采样和保持电容器通常需要由其他斩波放大器外部。 Further, the LTC1051/LTC1053 offer better combined overall DC and AC performance than is available from other chopper stabilized amplifiers with or without internal sample/hold capacitors.此外,LTC1051/LTC1053提供更好的结合整体的DC和AC性能比是从其他斩波稳定放大器,带或不带内部采样/保持电容。
The LTC1051/LTC1053 have an offset voltage of 0.5µV, drift of 0.01µV/°C, DC to 10Hz, input noise voltage typically 1.5µV PP and typical voltage gain of 140dB. LTC1051/LTC1053具有失调电压0.5μV,漂移0.01μV/℃,DC至10Hz,输入噪声电压通常1.5μVPP和140分贝典型电压增益。 The slew rate of 4V/µs and gain bandwidth product of 2.5MHz are achieved with only 1mA of supply current per op amp.的4V/μs和2.5MHz的增益带宽积的压摆率只达到每运放电源电流1毫安。
Overload recover times from positive and negative saturation conditions are 1.5ms and 3ms respectively, about a 100 or more times improvement over chopper amplifiers using external capacitors.超载,从正面和负面的饱和条件下的恢复时间是1.5ms的分别为3ms,约100次或以上,超过斩波放大器使用外部电容改善。
The LTC1051 is available in an 8-lead standard plastic dual-in-line package as well as a 16-pin SW package. LTC1051是在8引线标准的塑料双列直插式封装以及16引脚SW包。 The LTC1053 is available in a standard 14-pin plastic package and an 18-pin SO. LTC1053是在一个标准的14引脚塑料封装和18引脚SO。 The LTC1051/LTC1053 are plug in replacements for most standard dual/quad op amps with improved performance. LTC1051/LTC1053是插在提高性能的最标准的双通道/四运算放大器的替代品。
-
应用
- Thermocouple Amplifiers热电偶放大器
- Electronic Scales电子秤
- Medical Instrumentation医疗器械
- Strain Gauge Amplifiers应变计放大器
- High Resolution Data Acquistion高分辨率的数据采集
- DC Accurate R, C Active Filters直流精确的R,C有源滤波器