EL7155

• Clocking speeds up to 40MHz速度高达40MHz的时钟
• 15ns tr/tf at 2000pF C _LOAD 15ns的风帆/转铁蛋白在2000pF ç _负荷
• 0.5ns rise and fall times mismatch 0.5ns的上升和下降时间不匹配
• 0.5ns TON-TOFF prop delay mismatch 0.5ns吨花花公子支柱延迟不匹配
• 3.5pF typical input capacitance典型输入电容3.5pF
• 3.5A peak drive 3.5A的峰值驱动
• Low on resistance of 3.5Ω对低电阻3.5Ω
• High capacitive drive capability高容性驱动能力
• Operates from 4.5V up to 16.5V从4.5V至16.5V操作注册
• Pb-free plus anneal available (RoHS compliant)无铅加退火用（符合RoHS）

The EL7155 high performance pin driver with 3-state is suited to many ATE and level-shifting applications.高性能的EL7155三态引脚驱动器适合于多种ATE和电平转换的应用。 The 3.5A peak drive capability makes this part an excellent choice when driving high capacitance loads.在3.5A的峰值驱动能力，使这部分驾驶时一个很好的选择高电容负载。

Output pins OUT _H and OUT _L are connected to input pins V _H and V _L respectively, depending on the status of the IN pin.输出引脚输出_H和_L的输出连接到输入引脚的_V H和_V L的分别，取决于引脚的状态中。 One of the output pins is always in 3-state, except when the OE pin is active low, in which case both outputs are in 3-state mode.在输出引脚之一是在三态，总是除了当OE引脚为低电平有效，在这种情况下，两个输出处于三态模式。 The isolation of the output FETs from the power supplies enables V _H and V _L to be set independently, enabling level-shifting to be implemented.这些物资从电源隔离的输出FET使_V H和_V L的是独立设置，使电平转换实施。

This pin driver has improved performance over existing pin drivers.该引脚驱动程序有改善了现有的接脚驱动程序的性能。 It is specifically designed to operate at voltages down to 0V across the switch elements while maintaining good speed and on-resistance characteristics.它是特别设计，在电压下降到0V时整个开关元件，同时保持良好的速度和导通电阻特性。

Available in 8-pin SO and 8-pin PDIP packages, the EL7155 is specified for operation over the full -40 ^o C to +85 ^o C temperature range.封装采用8引脚SO和8引脚PDIP，EL7155指定的温度范围内工作在^-40℃至^85℃。